May 102013
 

DEWALT Bare-Tool DC390B 6-1/2-Inch 18-Volt Cordless Circular Saw

DEWALT Bare-Tool DC390B  6-1/2-Inch 18-Volt Cordless Circular Saw

  • 3,700 RPM for fast rip cuts and cross cuts
  • 6-1/2-inch carbide tipped blade for 2x cutting capacity at 90 degrees and 45 degrees
  • High strength magnesium shoe and upper guard provides increased durability
  • 0-50 degrees bevel capacity provides additional capacity for a multitude of applications
  • Fan-cooled motor with replaceable brushes for maximum power and durability; tool only, no battery

The DeWalt DC390 is a 18V cordless circular saw (and is the tool only). The saw uses 6-1/2 inch carbide tipped blade for 2x cutting capacity at 90 and 45 degrees. It has high strength magnesium shoe and upper guard provides increased durability. 0-50 degree bevel capacity provides additional capacity for a multitude of applications. It features fan-cooled motor with replaceable brushes for maximum power and durability. Whether building wood decks or dormers, bookcases or kitchen cabinets, the pr

List Price: $ 197.00

Price: $ 197.00

  3 Responses to “DEWALT Bare-Tool DC390B 6-1/2-Inch 18-Volt Cordless Circular Saw”

  1. 85 of 87 people found the following review helpful
    5.0 out of 5 stars
    This is one almighty little saw !!!, February 11, 2007
    By 
    L. Patten (california usa) –
    (REAL NAME)
      

    The saw arrived within a week, in perfect condition and I have been framing in a bathroom with it all day. It is a great tool and it almost keeps up with my mag77 only I don’t need to roll out any cord’s.

    PLEASE NOTE: this saw has recieved some undue bad ratings because it is a BARE TOOL (a perfect replacement or addition to your existing 18v DeWalt tool collection) It does not come with a battery or charger … well duh! A single battery retails for over $80 alone, what do you expect? It does however come with a blade (nice little suprise to me).

    This is a great buy and I’m sure you will be very pleased with it’s capabilities if you purchase one.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  2. 36 of 37 people found the following review helpful
    5.0 out of 5 stars
    3 years and counting…., September 14, 2008
    By 
    jg (OLNEY, MD United States) –

    I thought i was just picking up a trim saw when i bought this 3 years ago.
    Apparently i was wrong. I am a handyman/carpenter by trade and have used this thing to rip 1x and plywood, crosscut 2x anything…and it takes it. I keep 3 different blades and always try to use the appropriate one for the material i am cutting and of course, a fully charged battery.
    The last framing job i did, i used this thing to cut over 250 2×4′s for the walls. The corded Makita sat unused for two days.
    For all the criticism of this saw, it does the job for me…for 3 years now of daily and sometimes abusive use.
    But, as always, the Dewalt batteries suck so i keep 3-4 charged all day.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

  3. 60 of 65 people found the following review helpful
    3.0 out of 5 stars
    An Average Circular Saw, Satisfactory For Home Owner Use, November 21, 2010
    By 
    Stephen Tashiro “sometimes reliable” (Las Cruces, NM United States) –
    (REAL NAME)
      

    Amazon Verified Purchase(What’s this?)
    This review is from: DEWALT Bare-Tool DC390B 6-1/2-Inch 18-Volt Cordless Circular Saw (Tools & Home Improvement)

    At the current time, cordless saws have noticeably less power than corded tools. The DeWalt DC390 is no exception to this. It will certainly cut 2″ thick fir and pine lumber, but you won’t get the same rate of production as with a corded saw.

    This saw has a thick base plate, which I like. Thinner stamped metal base plates on circular saws often get bent after several years of use and the saws never work well after this happens.

    A routine use of the DeWalt DC390 will be to cut thin stock such as plywood. It’s handy to have a cordless tool for this purpose since you often have to extend your reach to make cuts. However, this saw is poorly balanced for such work. With the cut depth set shallow, the battery is raised high and the saw is top heavy. If you put the saw down as you would a normal circular saw, it will tip over. The lower half of the saw guard is made of a slightly flexible plastic. Given this saw is likely to tip off worktables frequently, I think this is better than having a metal guard which might get permanently bent. Plywood is often cut using a guide such as a bar of metal clamped to the work. It is difficult to cut with the DeWalt DC390 while keeping it snug to a guide because, in addition to the trigger, the saw has a safety that must be pressed with your thumb. It prevents you from wrapping your thumb around the handle, so you don’t have a normal grip. (The DC390 also suffers from a weakness of all direct drive circular saws in that the motor leaves little clearance under it and tends to bump into any clamps that you use to hold the guide. It seems to me that manufacturers could do a better job of designing a motor housing that provided more clearance, even if only when the saw is set to do shallow cuts and motor is raised relatively high.)

    The locking knobs for the bevel and depth of cut are made of hard plastic. I find them comfortable to use.

    The saw uses a 6 1/2 inch diameter blade with a 5/8 inch arbor hole. The blade included with the saw has 16 teeth and is for rough carpentry. (It is easy to find a variety blades that fit this saw in hardware stores. Don’t buy a blade with a 10 mm arbor by mistake.) The arbor bolt is reversed threaded and must be tightened with a hex key. The key is provided and it can be stored securely by pressing it into slots in the body of the saw.

    Like many cordless saws, this is a “left handed” saw, which has the blade mounted on the left side of the motor. For a right handed person, the consequences of a “left handed” saw are these: When you cut along a marked line, you will be able to see where the blade is cutting clearly because the motor won’t be in the way. However, when you perform the typical operation of holding a board down with your left hand while you cut off the right end of the board, the wider part of the saw’s base is resting on the wood that will bend and fall away. The saw also tends to tilt and fall away. You have to apply attention and force to keep the base of the saw level.

    This particular product offer ( DC390B, “tool only”) does not include a battery for the saw or a charger. The saw’s shipping weight is listed as 8 lbs ( about the weight of a plastic gallon jug of water) and, to me, this feels correct for the weight of the tool. Attaching a battery adds weight. At the current time ( Nov. 2010) DeWalt makes both 18 V Nicad batteries and more expensive and lighter 18 V lithium batteries that fit its 18V cordless tools.

    I rate this saw as three stars out of five to indicate that it is an average cordless saw. It may be a better than average deal depending on your requirements and its current price.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

 Leave a Reply

(required)

(required)

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>